Back
MAGNETIC LOOP ANTENNAS Cartloom Store
0 $0.00

CHA DIY MAGNETIC LOOP STARTER KIT

DIY STARTER KIT

1 X PRE-ASSEMBLED CAPACITOR

  • 600 Vrms MAX
  • 12.5 pF MIN - 432.5 pF MAX PER SECTION
  • 2 SECTIONS TOTAL
  • 6:1 DRIVE (3 TURNS MIN TO MAX) INSTALLED
  • TWO WIRES PRE-SOLDERED WITH TERMINALS
  • CAPACITOR INSTALLED ON A PRE-DRILLED MOUNTING PLATE
  • KNOB INSTALLED

1 X 12' LMR-400 4 X SILVER PLATED PL-259 2 X SO-239

Those capacitors are the same that are used in the CHA F-LOOP and the CHA P-LOOP from Chameleon Antenna - So you know what they can do!

$99.00
Preview

CHA SS ADAPTER

The CHA SS Adapter is a 3/8-24 to 1/4-20 adapter made of stainless steel. It's allowing the CHA P-LOOP 2.0 and the CHA F-LOOP 2.0 to be compatible with the CHA JAWMOUNT and the CHA SPIKE MOUNT.

$35.00
Preview

CHA BOOSTER KIT

Covers 15M to 40M


This 146" LMR-400 radiator which comes with the 8" diameter coupling loop, will create a 48" diameter magnetic loop for the CHA P-LOOP 2.0.

$65.00
Preview

CHA F-LOOP 2.0

The CHA F-LOOP 2.0 was designed with portability, ease of use simplicity, ruggedness and high performance in mind. Unlike any other similar antennas on the market, the CHA F-LOOP 2.0 is made with premium materials that are precisely manufactured and assembled in the USA!


This is an exciting new product from Chameleon Antenna. Easily deployable HF magnetic loop antennas, also called small transmitting loops, have been routinely used for many years in military, diplomatic, and shipboard HF communication links, where robust and reliable general coverage radio communication is a necessity. 


These antennas have only recently become commercially available for amateur radio. The real practical advantage of the small loop, compared to a short vertical whip tuned against earth or a full sized vertical antenna, is the loop’s freedom from dependence on a ground plane and earth for achieving efficient operation; this unique characteristic has profound significance for portable or restricted space antennas. 


In comparison, the bottom of a vertically oriented loop does not need to be more than a loop diameter above ground, making it very easy to install in a restricted space location. There is no significant improvement in sky wave propagation performance when a small loop is installed high; all that matters is the loop is substantially clear of objects in the immediate area and oriented towards the desired direction of radiation. 


Field trials of the CHA F-LOOP 2.0 demonstrated that an indoor magnetic loop antenna was only around one to two S-units lower, on both transmit and receive, than an outdoor full size quarter wave vertical antenna. Remarkable for an antenna that is only less than three foot in diameter and covers 3.5 MHz to 29.7 MHz (80 – 10 meter ham bands)!


The magnetic loop is different from typical antennas because it emphasizes the magnetic part of the radio wave (H field) rather than the electric part (E field) of the radio wave. It also has a high Q resonance of around 17 KHz on 40 meters, providing immunity from interference outside the bandpass. 


The CHA F-LOOP 2.0 Antenna was designed with weight, portability, versatility and cost in mind and is ideal for RV/camping, hotels, apartments, condominiums, homeowner’s associations, deed restrictions and CCRs (Covenants, Conditions & Restrictions), Shortwave Listening (SWL) and other places where it is not feasible to erect a multi-band wire or vertical antenna. We’re sure you will be amazed by the performance and agree that the CHA F-LOOP 2.0 is the most advanced portable magnetic loop antenna available today.


The crimp PL-259 connectors that we're using with all our RG-58 are UHF-7604L connectors from PAN-PACIFIC. They're the best and the leader in the industry.

- There is no need for soldering; therefore, installation time is reduced.
- It takes an experienced technician about 15 seconds to install a crimp-crimp connector, thereby greatly reducing the time required to create cable assemblies. This is very important in today's cabling market where time is of the essence and fewer technicians are being asked to maintain more and more equipment. Digital video, computer and network cabling is almost universally crimped today.
- Crimped connections, done correctly, can be superior to soldered connections.
- A good crimped connection deforms the metal sufficiently past the yield point, but not too much, so that the "spring back" keeps the connection secure, even under thermal cycling (the coefficient of expansion of the two metals might be different) and vibration.
- A good crimp connection is gas tight and won't wick: it is sometimes referred to as a "cold weld".
- Like the solder method, it can be used on solid or stranded conductors, and provides a good mechanical and electrical connection.


Specifications:


  • 3.5 MHz to 29.7 MHz (80 - 10 meter ham bands)
  • Power handling: 10W CW or 25W SSB
  • Proprietary solderless aluminum coupling loop. This coupling loop design can be used with any types of coax cable feed-lines. Because of its rigidity, the antenna tuning will remain stable, consistent and will prevent SWR fluctuations due to usual coupling loop deformation.
  • The three sections collapsible portable mast allows easy storage, fast deployment and ease of use in all conditions. No need to play with multiple tubular PVC sections to assemble the antenna.
  • The bottom of the telescopic mast is equipped with a stainless steel 3/8-24 threaded hole for easy tripod installation on the tuning box 3/8-24 screw.
  • The 12’ RG-58 with integrated RFI choke feed-line decouples the coupling loop from the radio which is essential to prevent SWR fluctuation while rotating the antenna or moving the coax cable around.
  • Our custom made capacitors which are equipped with a 6:1 reducer, offer a smooth and consistent tuning while providing the highest efficient performance on the market.
  • The Condor Mole military bag offers easy storage, transportation and protection for the unit.
  • The unit is now equipped with a NEW larger Delrin tuning knob for smoother tuning and operation.
  • A 48" diameter BOOSTER KIT for 15M to 40M can be purchased separately.
  • The base of the tuning unit is equipped with an aluminum anodized base plate. That base plate can be placed directly on a flat surface or can be mounted on a tripod (14-20 thread or 3/8 through hole for CHA JAWMOUNT installation).
  • The CHA F-LOOP Plus 2.0 comes with everything included with the CHA F-LOOP 2.0 + 36” diameter collapsible loop radiator made of two sections of 1” 6061-T6 aluminum alloys pipe + 7" diameter aluminum coupling loop.


The antenna system consists of:

1 X CHA F-LOOP 2.0 tuning box
2 X LMR-400 coax cable radiator
1 X Dual Female connector
1 X 12’ with integrated RFI choke feed-line
1 X Condor Molle Military Bag
1 X Proprietary coupling loop
1 X Telescopic Mast
1 X User guide


Preview

CHA HIGH EFFICIENCY LOOP

The HIGH EFFICIENCY LOOP is made of two sections of aluminum alloy 6065-T6 tubing of 1" diameter. It's made to be used with the CHA F-LOOP 2.0 to create the CHA F-LOOP Plus 2.0. Assembled the unit is 36" diameter and will increase the performance of the antenna.

$200.00
Preview

CHA JAWMOUNT

The Chameleon  Jaw Mount has been assembled to offer portable antenna versatility for Chameleon Antenna owners. The mount orientation can easily be changed with a simple 3/16 Allen Key. The mount can also be used for NVIS antenna configuration.

$39.00
Preview

CHA P-LOOP 2.0

The CHA P-LOOP 2.0 was designed with portability, ease of use simplicity, ruggedness and high performance in mind. Unlike any other similar antennas on the market, the CHA P-LOOP 2.0 is made with premium materials that are precisely manufactured and assembled in the USA!


This is an exciting new product from Chameleon Antenna. Easily deployable HF magnetic loop antennas, also called small transmitting loops, have been routinely used for many years in military, diplomatic, and shipboard HF communication links, where robust and reliable general coverage radio communication is a necessity. 


These antennas have only recently become commercially available for amateur radio. The real practical advantage of the small loop, compared to a short vertical whip tuned against earth or a full sized vertical antenna, is the loop’s freedom from dependence on a ground plane and earth for achieving efficient operation; this unique characteristic has profound significance for portable or restricted space antennas. 


In comparison, the bottom of a vertically oriented loop does not need to be more than a loop diameter above ground, making it very easy to install in a restricted space location. There is no significant improvement in sky wave propagation performance when a small loop is installed high; all that matters is the loop is substantially clear of objects in the immediate area and oriented towards the desired direction of radiation. 


The magnetic loop is different from typical antennas because it emphasizes the magnetic part of the radio wave (H field) rather than the electric part (E field) of the radio wave. It also has a high Q resonance of around 15 KHz on 40 meters, providing immunity from interference outside the bandpass. 


The new CHA P-LOOP 2.0 is more rugged, lighter weight, and more weather resistant than previous versions and using the optional power compensator, can handle higher power. We’re sure you will be amazed by the performance and agree that the CHA P-LOOP 2.0 is the most advanced portable magnetic loop antenna available today.


The crimp PL-259 connectors that we're using with all our RG-58 are UHF-7604L connectors from PAN-PACIFIC. They're the best and the leader in the industry.

- There is no need for soldering; therefore, installation time is reduced.


- It takes an experienced technician about 15 seconds to install a crimp-crimp connector, thereby greatly reducing the time required to create cable assemblies. This is very important in today's cabling market where time is of the essence and fewer technicians are being asked to maintain more and more equipment. Digital video, computer and network cabling is almost universally crimped today.


- Crimped connections, done correctly, can be superior to soldered connections.


- A good crimped connection deforms the metal sufficiently past the yield point, but not too much, so that the "spring back" keeps the connection secure, even under thermal cycling (the coefficient of expansion of the two metals might be different) and vibration.


- A good crimp connection is gas tight and won't wick: it is sometimes referred to as a "cold weld".


- Like the solder method, it can be used on solid or stranded conductors, and provides a good mechanical and electrical connection.


Specifications:


  • 7.0 MHz to 30.0 MHz (40 - 10 meter ham bands)
  • Power handling: 10W CW or 25W SSB
  • Power handling with the POWER COMPENSATOR: 30W CW or 60W SSB (MORE INFO ON THE USER GUIDE)
  • The CHA P-LOOP 2.0 is weather resistant to dripping water when mounted near vertically.
  • The tuning box is equipped with a Picatinny rail for easy assembling of the unit.
  • Proprietary solderless aluminum coupling loop. This coupling loop design can be used with any types of coax cable feed-lines. Because of its rigidity, the antenna tuning will remain stable, consistent and will prevent SWR fluctuations due to usual coupling loop deformation.
  • The three sections collapsible portable mast allows easy storage, fast deployment and ease of use in all conditions. No need to play with multiple tubular PVC sections to assemble the antenna.
  • The rubberized handle at the bottom insures a great antenna grip and an easy thumb tuning when operating the antenna handheld.
  • The bottom of the telescopic mast is equipped with a stainless steel 1/4-20 threaded hole for easy tripod installation.
  • The 12’ RG-58 with integrated RFI choke feed-line decouples the coupling loop from the radio which is essential to prevent SWR fluctuation while rotating the antenna or moving the coax cable around.
  • Our custom made capacitors which are equipped with a 6:1 reducer, offer a smooth and consistent tuning while providing the highest efficient performance on the market.
  • The cotton canvas classic military messenger bag offers easy storage, transportation and protection for the unit.
  • The unit is now equipped with a NEW larger Delrin tuning knob for smoother tuning and operation.
  • A 48" diameter BOOSTER KIT for 15M to 40M can be purchased separately.The base of the tuning unit is equipped with an aluminum anodized base plate. That base plate can be placed directly on a flat surface or can be mounted on a tripod (14-20 thread or 3/8 through hole for CHA JAWMOUNT installation).


The antenna system consists of:

1 X CHA P-LOOP 2.0 water resistant tuning box
1 X Stainless Steel base adapter 1/4”-20
1 X LMR-400 coax cable radiator
1 X Power Compensator (optional)
1 X 12’ with integrated RFI choke feed-line
1 X 100% Cotton canvas classic military messenger bag
1 X Proprietary coupling loop
1 X Folding Tripod
1 X User guide

Preview

CHA POWER COMPENSATOR

The CHA PC (Power Compensator) is built exclusively by Chameleon Antenna and increases the power handling capability of all Chameleon Antenna magnetic loop antennas by about 2 1⁄2 times. It will also work with other brands of magnetic loop antennas that use a radiator loop with a UHF Connector (PL-259/SO-239). It is easy to install and will increase the utility of your portable magnetic loop antenna.


ATTENTION: IF USED WITH THE CHA F-LOOP 2.0 OR CHA F-LOOP Plus 2.0 THE MAXIMUM POWER OUTPUT WILL BE AROUND 25W CW ON 40M, 60M AND 80M BECAUSE THE SWITCH ON THE F-LOOP MUST BE PLACED ON "A" WHICH REDUCE THE VOLTAGE HANDLING BUT INCREASE THE CAPACITANCE.


PLEASE READ THE USER GUIDE CAREFULLY BEFORE USING THE POWER COMPENSATOR.

$99.00
Preview

CHA DIY MAGNETIC LOOP STARTER KIT

$99.00

DIY STARTER KIT

1 X PRE-ASSEMBLED CAPACITOR

  • 600 Vrms MAX
  • 12.5 pF MIN - 432.5 pF MAX PER SECTION
  • 2 SECTIONS TOTAL
  • 6:1 DRIVE (3 TURNS MIN TO MAX) INSTALLED
  • TWO WIRES PRE-SOLDERED WITH TERMINALS
  • CAPACITOR INSTALLED ON A PRE-DRILLED MOUNTING PLATE
  • KNOB INSTALLED

1 X 12' LMR-400 4 X SILVER PLATED PL-259 2 X SO-239

Those capacitors are the same that are used in the CHA F-LOOP and the CHA P-LOOP from Chameleon Antenna - So you know what they can do!

Read More
View All Products

CHA SS ADAPTER

$35.00

The CHA SS Adapter is a 3/8-24 to 1/4-20 adapter made of stainless steel. It's allowing the CHA P-LOOP 2.0 and the CHA F-LOOP 2.0 to be compatible with the CHA JAWMOUNT and the CHA SPIKE MOUNT.

Read More
View All Products

CHA BOOSTER KIT

For CHA F-LOOP 2.0 and P-LOOP 2.0

$65.00

Covers 15M to 40M


This 146" LMR-400 radiator which comes with the 8" diameter coupling loop, will create a 48" diameter magnetic loop for the CHA P-LOOP 2.0.

Read More
View All Products

CHA F-LOOP 2.0

3.5-29.7 MHz

The CHA F-LOOP 2.0 was designed with portability, ease of use simplicity, ruggedness and high performance in mind. Unlike any other similar antennas on the market, the CHA F-LOOP 2.0 is made with premium materials that are precisely manufactured and assembled in the USA!


This is an exciting new product from Chameleon Antenna. Easily deployable HF magnetic loop antennas, also called small transmitting loops, have been routinely used for many years in military, diplomatic, and shipboard HF communication links, where robust and reliable general coverage radio communication is a necessity. 


These antennas have only recently become commercially available for amateur radio. The real practical advantage of the small loop, compared to a short vertical whip tuned against earth or a full sized vertical antenna, is the loop’s freedom from dependence on a ground plane and earth for achieving efficient operation; this unique characteristic has profound significance for portable or restricted space antennas. 


In comparison, the bottom of a vertically oriented loop does not need to be more than a loop diameter above ground, making it very easy to install in a restricted space location. There is no significant improvement in sky wave propagation performance when a small loop is installed high; all that matters is the loop is substantially clear of objects in the immediate area and oriented towards the desired direction of radiation. 


Field trials of the CHA F-LOOP 2.0 demonstrated that an indoor magnetic loop antenna was only around one to two S-units lower, on both transmit and receive, than an outdoor full size quarter wave vertical antenna. Remarkable for an antenna that is only less than three foot in diameter and covers 3.5 MHz to 29.7 MHz (80 – 10 meter ham bands)!


The magnetic loop is different from typical antennas because it emphasizes the magnetic part of the radio wave (H field) rather than the electric part (E field) of the radio wave. It also has a high Q resonance of around 17 KHz on 40 meters, providing immunity from interference outside the bandpass. 


The CHA F-LOOP 2.0 Antenna was designed with weight, portability, versatility and cost in mind and is ideal for RV/camping, hotels, apartments, condominiums, homeowner’s associations, deed restrictions and CCRs (Covenants, Conditions & Restrictions), Shortwave Listening (SWL) and other places where it is not feasible to erect a multi-band wire or vertical antenna. We’re sure you will be amazed by the performance and agree that the CHA F-LOOP 2.0 is the most advanced portable magnetic loop antenna available today.


The crimp PL-259 connectors that we're using with all our RG-58 are UHF-7604L connectors from PAN-PACIFIC. They're the best and the leader in the industry.

- There is no need for soldering; therefore, installation time is reduced.
- It takes an experienced technician about 15 seconds to install a crimp-crimp connector, thereby greatly reducing the time required to create cable assemblies. This is very important in today's cabling market where time is of the essence and fewer technicians are being asked to maintain more and more equipment. Digital video, computer and network cabling is almost universally crimped today.
- Crimped connections, done correctly, can be superior to soldered connections.
- A good crimped connection deforms the metal sufficiently past the yield point, but not too much, so that the "spring back" keeps the connection secure, even under thermal cycling (the coefficient of expansion of the two metals might be different) and vibration.
- A good crimp connection is gas tight and won't wick: it is sometimes referred to as a "cold weld".
- Like the solder method, it can be used on solid or stranded conductors, and provides a good mechanical and electrical connection.


Specifications:


  • 3.5 MHz to 29.7 MHz (80 - 10 meter ham bands)
  • Power handling: 10W CW or 25W SSB
  • Proprietary solderless aluminum coupling loop. This coupling loop design can be used with any types of coax cable feed-lines. Because of its rigidity, the antenna tuning will remain stable, consistent and will prevent SWR fluctuations due to usual coupling loop deformation.
  • The three sections collapsible portable mast allows easy storage, fast deployment and ease of use in all conditions. No need to play with multiple tubular PVC sections to assemble the antenna.
  • The bottom of the telescopic mast is equipped with a stainless steel 3/8-24 threaded hole for easy tripod installation on the tuning box 3/8-24 screw.
  • The 12’ RG-58 with integrated RFI choke feed-line decouples the coupling loop from the radio which is essential to prevent SWR fluctuation while rotating the antenna or moving the coax cable around.
  • Our custom made capacitors which are equipped with a 6:1 reducer, offer a smooth and consistent tuning while providing the highest efficient performance on the market.
  • The Condor Mole military bag offers easy storage, transportation and protection for the unit.
  • The unit is now equipped with a NEW larger Delrin tuning knob for smoother tuning and operation.
  • A 48" diameter BOOSTER KIT for 15M to 40M can be purchased separately.
  • The base of the tuning unit is equipped with an aluminum anodized base plate. That base plate can be placed directly on a flat surface or can be mounted on a tripod (14-20 thread or 3/8 through hole for CHA JAWMOUNT installation).
  • The CHA F-LOOP Plus 2.0 comes with everything included with the CHA F-LOOP 2.0 + 36” diameter collapsible loop radiator made of two sections of 1” 6061-T6 aluminum alloys pipe + 7" diameter aluminum coupling loop.


The antenna system consists of:

1 X CHA F-LOOP 2.0 tuning box
2 X LMR-400 coax cable radiator
1 X Dual Female connector
1 X 12’ with integrated RFI choke feed-line
1 X Condor Molle Military Bag
1 X Proprietary coupling loop
1 X Telescopic Mast
1 X User guide


Read More
View All Products

CHA HIGH EFFICIENCY LOOP

For CHA F-LOOP 2.0

$200.00

The HIGH EFFICIENCY LOOP is made of two sections of aluminum alloy 6065-T6 tubing of 1" diameter. It's made to be used with the CHA F-LOOP 2.0 to create the CHA F-LOOP Plus 2.0. Assembled the unit is 36" diameter and will increase the performance of the antenna.

Read More
View All Products

CHA JAWMOUNT

1.8-54 MHz

$39.00

The Chameleon  Jaw Mount has been assembled to offer portable antenna versatility for Chameleon Antenna owners. The mount orientation can easily be changed with a simple 3/16 Allen Key. The mount can also be used for NVIS antenna configuration.

Read More
View All Products

CHA P-LOOP 2.0

7.0-29.7 MHz

The CHA P-LOOP 2.0 was designed with portability, ease of use simplicity, ruggedness and high performance in mind. Unlike any other similar antennas on the market, the CHA P-LOOP 2.0 is made with premium materials that are precisely manufactured and assembled in the USA!


This is an exciting new product from Chameleon Antenna. Easily deployable HF magnetic loop antennas, also called small transmitting loops, have been routinely used for many years in military, diplomatic, and shipboard HF communication links, where robust and reliable general coverage radio communication is a necessity. 


These antennas have only recently become commercially available for amateur radio. The real practical advantage of the small loop, compared to a short vertical whip tuned against earth or a full sized vertical antenna, is the loop’s freedom from dependence on a ground plane and earth for achieving efficient operation; this unique characteristic has profound significance for portable or restricted space antennas. 


In comparison, the bottom of a vertically oriented loop does not need to be more than a loop diameter above ground, making it very easy to install in a restricted space location. There is no significant improvement in sky wave propagation performance when a small loop is installed high; all that matters is the loop is substantially clear of objects in the immediate area and oriented towards the desired direction of radiation. 


The magnetic loop is different from typical antennas because it emphasizes the magnetic part of the radio wave (H field) rather than the electric part (E field) of the radio wave. It also has a high Q resonance of around 15 KHz on 40 meters, providing immunity from interference outside the bandpass. 


The new CHA P-LOOP 2.0 is more rugged, lighter weight, and more weather resistant than previous versions and using the optional power compensator, can handle higher power. We’re sure you will be amazed by the performance and agree that the CHA P-LOOP 2.0 is the most advanced portable magnetic loop antenna available today.


The crimp PL-259 connectors that we're using with all our RG-58 are UHF-7604L connectors from PAN-PACIFIC. They're the best and the leader in the industry.

- There is no need for soldering; therefore, installation time is reduced.


- It takes an experienced technician about 15 seconds to install a crimp-crimp connector, thereby greatly reducing the time required to create cable assemblies. This is very important in today's cabling market where time is of the essence and fewer technicians are being asked to maintain more and more equipment. Digital video, computer and network cabling is almost universally crimped today.


- Crimped connections, done correctly, can be superior to soldered connections.


- A good crimped connection deforms the metal sufficiently past the yield point, but not too much, so that the "spring back" keeps the connection secure, even under thermal cycling (the coefficient of expansion of the two metals might be different) and vibration.


- A good crimp connection is gas tight and won't wick: it is sometimes referred to as a "cold weld".


- Like the solder method, it can be used on solid or stranded conductors, and provides a good mechanical and electrical connection.


Specifications:


  • 7.0 MHz to 30.0 MHz (40 - 10 meter ham bands)
  • Power handling: 10W CW or 25W SSB
  • Power handling with the POWER COMPENSATOR: 30W CW or 60W SSB (MORE INFO ON THE USER GUIDE)
  • The CHA P-LOOP 2.0 is weather resistant to dripping water when mounted near vertically.
  • The tuning box is equipped with a Picatinny rail for easy assembling of the unit.
  • Proprietary solderless aluminum coupling loop. This coupling loop design can be used with any types of coax cable feed-lines. Because of its rigidity, the antenna tuning will remain stable, consistent and will prevent SWR fluctuations due to usual coupling loop deformation.
  • The three sections collapsible portable mast allows easy storage, fast deployment and ease of use in all conditions. No need to play with multiple tubular PVC sections to assemble the antenna.
  • The rubberized handle at the bottom insures a great antenna grip and an easy thumb tuning when operating the antenna handheld.
  • The bottom of the telescopic mast is equipped with a stainless steel 1/4-20 threaded hole for easy tripod installation.
  • The 12’ RG-58 with integrated RFI choke feed-line decouples the coupling loop from the radio which is essential to prevent SWR fluctuation while rotating the antenna or moving the coax cable around.
  • Our custom made capacitors which are equipped with a 6:1 reducer, offer a smooth and consistent tuning while providing the highest efficient performance on the market.
  • The cotton canvas classic military messenger bag offers easy storage, transportation and protection for the unit.
  • The unit is now equipped with a NEW larger Delrin tuning knob for smoother tuning and operation.
  • A 48" diameter BOOSTER KIT for 15M to 40M can be purchased separately.The base of the tuning unit is equipped with an aluminum anodized base plate. That base plate can be placed directly on a flat surface or can be mounted on a tripod (14-20 thread or 3/8 through hole for CHA JAWMOUNT installation).


The antenna system consists of:

1 X CHA P-LOOP 2.0 water resistant tuning box
1 X Stainless Steel base adapter 1/4”-20
1 X LMR-400 coax cable radiator
1 X Power Compensator (optional)
1 X 12’ with integrated RFI choke feed-line
1 X 100% Cotton canvas classic military messenger bag
1 X Proprietary coupling loop
1 X Folding Tripod
1 X User guide

Read More
View All Products

CHA POWER COMPENSATOR

$99.00

The CHA PC (Power Compensator) is built exclusively by Chameleon Antenna and increases the power handling capability of all Chameleon Antenna magnetic loop antennas by about 2 1⁄2 times. It will also work with other brands of magnetic loop antennas that use a radiator loop with a UHF Connector (PL-259/SO-239). It is easy to install and will increase the utility of your portable magnetic loop antenna.


ATTENTION: IF USED WITH THE CHA F-LOOP 2.0 OR CHA F-LOOP Plus 2.0 THE MAXIMUM POWER OUTPUT WILL BE AROUND 25W CW ON 40M, 60M AND 80M BECAUSE THE SWITCH ON THE F-LOOP MUST BE PLACED ON "A" WHICH REDUCE THE VOLTAGE HANDLING BUT INCREASE THE CAPACITANCE.


PLEASE READ THE USER GUIDE CAREFULLY BEFORE USING THE POWER COMPENSATOR.

Read More
View All Products